This 9.6V AA NiMH battery pack is built for Leica MD-R8 motor drive applications and related camera repair or DIY replacement projects. It uses eight AA-size NiMH cells in an 8S arrangement, with a nominal cell voltage of 1.2V and a nominal pack voltage of 9.6V.
Motor-driven film winding creates short, repeated load pulses. The pack is therefore designed around consistent voltage under load, secure spot-welded connections and a mechanical layout that must be checked against the camera compartment, connector and original battery configuration.
| Chemistry | Nickel-metal hydride (NiMH) |
| Cell arrangement | 8 AA cells in series (8S) |
| Nominal pack voltage | 9.6V |
| Reference capacity | 2400mAh |
| Connection options | Spot-weld tabs, nickel strips, wires or connector by project |
| Typical use | Camera motor drives, repair and replacement projects |
Cell grade, capacity, tab layout, wire length, connector, shrink tubing, insulation, holders and retail or bulk packaging can be reviewed for OEM and repair-channel projects. If a protection component or NTC is required, it should be specified with the device dimensions and charger configuration.
Replacing a camera motor drive pack? Send photos of the original label, connector, polarity and compartment size for engineering review.
No. It is an aftermarket NiMH pack intended for use with the specified motor drive application. Compatibility and installation should be verified before use.
The charger must support an 8-cell, 9.6V NiMH configuration and the correct connector. Charger current and termination settings should be confirmed.
Yes. Provide the original connector photo, wiring requirement or mechanical drawing for review.




