News
Testing and Certifying Sealed NiMH Packs for Track Geometry Trolleys: Type Testing, Vibration and EMC Qualification, and the UN 3496 Transport Regime
2026-10-14
Paper C: build the test and certification plan for a sealed NiMH pack in a portable track geometry inspection trolley. Qualify cell performance to IEC 61951-2 (capacity, 0 C discharge, retention, endurance, resistance), safety to IEC 62133-1, climate, vibration, shock and fall to IEC 60068-2, ingress to EN 60529, railway vibration to IEC 61373, EMC to EN 61326-1 and EN 50121-3-2, then manage ageing, production acceptance, UN 3496/IATA A199, IMDG, ADR and EU 2023/1542.
Visit Weijiang Power at the 140th Canton Fair
2026-10-14
Meet Weijiang Power at the 140th Canton Fair - Area D, Booth 17.2 K18, October 15-19, 2026. Discuss NiMH & Li-ion OEM/ODM cells and custom packs, request free samples, and get a face-to-face engineering review.
Sizing Sealed NiMH Packs for Track Geometry Trolleys: Chemistry Selection, Series-Parallel Capacity, and Charge-Thermal Design for Portable Rail Geometry Measurement
2026-10-13
Paper B: turn a track geometry trolley's battery load into a sized sealed NiMH pack. Build the requirement sheet (voltage rail, baseline and pulse current, longest possession, cold and hot limits), compare lead-acid, NiCd, NiMH and lithium-ion, choose high-rate cells and the series-parallel count, apply end-of-life, low-temperature and depth-of-discharge derating, and define -Delta V/dT/dt charging and thermal design under IEC 61951-2, IEC 62133-1 and UN 3496.
Track Geometry Inspection Trolleys: The Operating Principle and Battery Load Profile Behind Portable Rail Geometry Measurement with Sealed NiMH Packs
2026-10-12
Paper A: how a portable track geometry inspection trolley works and the battery load it needs. Pushed or motor-assisted units work in short possessions, fusing laser rail sensors, IMU, total-station/GNSS and odometry to record gauge, level, alignment, cant and twist under EN 13848. The pack holds a steady sensor-and-logger baseline with assist, cold-start and upload peaks while protecting uninterrupted logging; sealed NiMH gives cold tolerance, vibration resistance and simple UN 3496 shipping.
Testing and Certifying Electric Ground Support Equipment Batteries: The IEC, EN and UN Qualification Plan for Sealed NiMH Packs in Electric Baggage Tractors and Electrical Ground Power Units
2026-10-11
Paper C: testing and certifying an electric ground support equipment battery. Qualify sealed nickel cells and packs against IEC 61951-2 for performance (capacity, charge retention, cycle endurance, overcharge, internal resistance) and IEC 62133-1 for safety (vibration, short circuit, fall, shock, thermal abuse, crush, temperature cycling); then qualify the machine within EN 1915 and EN 12312-15/-20 for CE, read aging and failures, and ship under UN 3496 rather than the lithium UN 38.3 regime.
Sizing Electric Ground Support Equipment Batteries: Selecting Chemistry, Cell Count, Charging and Thermal Design for Electric Baggage Tractors and Battery Ground Power Units
2026-10-10
Paper B: how to size and design an electric ground support equipment battery. Begin with two constraints - peak power from drawbar-pull and engine-start surges, and shift energy in kWh - then set the voltage and count series/parallel NiMH cells (an 80 V pack needs about 67 cells). Size pulse sag for cold and end-of-life resistance, design temperature-aware charging and thermal protection, and compare lead-acid, lithium and NiMH against IEC 61951-2, IEC 62133-1 and EN 12312.
Electric Ground Support Equipment on the Airport Ramp: The Operating Profile, Duty Cycle and Working Principle Behind Battery Baggage Tractors and Ground Power Units
2026-10-09
Paper A: how battery power works on the airport ramp. Map the eGSE fleet - electric baggage tractors, belt loaders and battery ground power units - and the governing standards (EN 1915, EN 12312). Walk a turnaround duty cycle from drawbar-pull and inching peaks to standby, then the aircraft interface (28.5 VDC, 115/200 V 400 Hz); compare lead-acid, lithium and NiMH on pulse delivery, cold-ramp performance, cycle life and safety; and see why an aqueous NiMH pack is a qualified ramp alternative.
Testing and Certifying Aircraft Emergency Battery Power Supplies: TSO-C173a, RTCA DO-293A and DO-160G Qualification, the 10-Minute Capacity Demonstration and the Two-Year Capacity Check
2026-10-08
Paper C: qualifying and maintaining a NiMH emergency supply. Map the certification stack - TSO-C173a for the battery, RTCA DO-293A as the MOPS and RTCA DO-160G for environmental and EMC conditions; demonstrate the 14 CFR 25.812 ten-minute capacity floor at critical ambient conditions and the 25.561 crash-restraint loads; run capacity, charge-retention, endurance and abuse tests plus temperature, altitude, vibration and shock; and define the two-year capacity check and non-lithium transport.
共 458 条
REQUEST MORE DETAILS
Please fill out the form below and click the button to request more information about
Name*
Whatsapp/Phone
Email*
Message*
Professional battery factory, support OEM & ODM customization.